
Introducing Web Configurator
Alongside other features and improvements, we are introducing IoTaaP OS – Web Configurator. Simple web interface hosted on your device that gives you the possibility to configure all device parameters using your browser, without even using serial connection and cables. IoTaaP OS – Web configurator is available in the IoTaaP OS – V3.1.0 release and you can also get it through PlatformIO.
How does it work?
During operation or boot, you have to press the predefined “Config button” on the board (routed to GPIO 25), the device will enter into Access Point (AP) mode and start the configurator. In the future, every device will come with a printed SSID and Password, but in order to find your device access data, you can get the SSID and Password of your device during boot through the serial port. During Web configurator operation, onboard led will blink in a predefined pattern.
Connect to your IoTaaP SSID and head to http://192.168.1.8, this will open the IoTaaP Web configurator:
Enter your parameters from the IoTaaP Console, click Confirm, and your device will automatically restart and start operating with the new configuration.
You can get the certificate here.
Related Posts

IoT Cloud setup
Creating DigitalOcean account After the successful setup of your IDE, it’s time to create your virtual server? For this purpose, you can use DigitalOcean, the IaaS provider. In order to get your DigitalOcean account and…
- Mar 09
- 4 mins read

Selecting the right software for IoT
In the beginning, it’s important to define project requirements and find reliable solutions based on them. Sometimes it can happen that there is no compatible platform so some parts of the system will have to…
- Mar 05
- < 1 min read
Latest Post
IoTaaP Cloud 3.0 is here
- 2021-06-27
- < 1 min read
IoTaaP OS Web configurator for ESP32
- 2021-03-17
- 2 mins read
Respiratory system analyzer
- 2021-03-16
- < 1 min read